Troubleshooting Computer Network At Home

Almost all computers in a home or office are connected to a network. And, in most cases, they are connected with a wire or wireless to a router. The router creates a network called the Local Area Network. All the computers on this network get their IP address from the router. In regards to computer network troubleshooting, the first thing we do is check if all the computers on the network have an IP address, and if each computer can be reached through the network.

Tell me about your problem by clicking here. I will reply in two hours with a solution.

Before we use the commands to get the data, we check all the connections. If the computer is connected to the router with a cable, then the LED lights near the LAN socket should be either:

The green light should be on all the time

Figure 1: LAN socket with green LED on.

The amber light should flash (this indicates data communication between the computer and router).

Figure 2: Amber LED light flashing indicates data communication.

The router should have a yellow LED light flashing.

Figure 3: The LED light on the router should flash, indicating a connection.

First, we see if our computer has an IP address. We shall start from this step most of the time.

Go to start in the search box and type in cmd, and then in the window, type in ipconfig.

Figure 4: Data given by an ipconfig command.

This will give all the information we need now and will show the IP address. Usually it will be like The subnet mask almost always will be The default Gateway will be or, depending on the router type. The router also has its own IP address, which  goes into the computer network configuration as a gateway.

If there is no IP shown or the IP is 169.xx.xx.xx, then there is no connection between the router and computer, or the router is not working properly. Of course there will be no Internet connection either.

Figure 5: Ipconfig shows

This way we can check that all the connected computers are reachable through the network. For this purpose, there is a command PING. For example, a ping will check if we can reach the router. If  Information Lost = 0, this means we received packets with no loss, and the connection is perfect.

Usually, problems arise when the computers have different operating systems. Even with a Windows operating system, different versions which are sharing the network or printer may not work without some settings tweaked.

Windows Vista, by default, does not allow file sharing with a computer on the LAN network. This is the same with Windows 7; we must go and change the settings in the Network and Sharing Centre in the Advanced Settings. Windows XP does not restrict sharing, but we need to choose the directory and printer that will be shared. This is probably because of higher security on the recent Windows operating systems.

The IP address always will be assigned to the computer, and it does not depend on the network or LAN type that the computer is connected to the router, to another computer, or directly to the Internet.

Back from computer network troubleshooting to troubleshooting computer problems

Back to home

A list of common computer problems

Basic computer troubleshooting

Diagnosing computer problems

Computer power supply troubleshooting

Computer monitor troubleshooting

Computer troubleshooting tips

What Do You Want To Read Next. Write Me A Message.

Tell Me About Your Problem By Clicking Here. I Will Reply In Two Hours With A Solution.
We Sell Windows 10 Home and Pro 32/64 bit Factory Reset, Reinstall, and Restore USB Flash Drives For Laptops And Desktop Computers.

Kindle book
Leave me a comment in the box below.

Tell Me Your Problem Here
Laptop RAM
PC motherboard
Gaming laptop
Dell laptop
Metcal soldering station

Reach Me on your phone browser using QR code below

Bar code WWW address